Nonlinear theory of non-uniform torsion of thin-walled open beams

A nonlinear theory of non-uniform torsion based on finite displacements is developed. Expressions for the finite nonlinear strains in Lagrangian coordinates and the Kirchhoff stresses for thin-walled open beams are presented. Using the principle of stationary total potential, the dual forms of the beam equilibrium equations are derived. For conservatively loaded thin-walled open beams a static stability criterion, based on the positive definiteness of the second variation of the total potential, is presented. The criterion developed takes into account the effects of changes in beam geometry such as initial bending curvature, prior to instability.     

The effect of monoethylene glycol on the stability of water-in-oil emulsions

It is important from both a strategic and economic standpoint to study the mechanism of formation of water/oil emulsions, to predict their increase of viscosity with respect to that of the crude oil, and to obtain information about the stability vs separation of these substances (since their presence can impair oil processing and distribution). The objective of this work was to ascertain the influence of monoethylene glycol (MEG) on these parameters and its action mechanism. The addition of MEG in different proportions in the oil emulsions significantly changed the flow curve of the emulsion, passing from a quasi-Newtonian one to a shear thinning behaviour. Besides this, when MEG was present at low concentrations, the demulsification process was slow and an increase in concentration made the emulsions more stable than samples containing the same aqueous phase proportion. Under the conditions studied, the addition of MEG did not reduce the quantity of the aqueous phase separated compared to the emulsions free of MEG, but significantly delayed the demulsification process. Rheology provided important information regarding the phase separation process of the aqueous phase in oil phase emulsions, and dynamic testing suggested that the most relevant effect of the addition of MEG is an increase of the emulsion elasticity that can be correlated with the increase in the emulsion stability observed by bottle test and Turbiscan.     

A comparison of fitting algorithms for diffusion-weighted MRI data analysis using an intravoxel incoherent motion model

Object

The objective of this study is to propose a modified VARiable PROjection (VARPRO) algorithm specifically tailored for fitting the intravoxel incoherent motion (IVIM) model to diffusion-weighted magnetic resonance imaging (DW-MRI) data from locally advanced rectal cancer (LARC).

Materials and methods

The proposed algorithm is compared with classical non-linear least squares (NLLS) analysis using the Levenberg-Marquardt (LM) algorithm and with two recently proposed algorithms for ‘segmented’ analysis. These latter two comprise two consecutive steps: first, a subset of parameters is estimated using a portion of data; second, the remaining parameters are estimated using the whole data and the previous estimates. The comparison between the algorithms was based on the \(R^2\) goodness-of-fit measure: performance analysis was carried out on real data obtained by DW-MRI on 40 LARC patients.

Results

The performance of the proposed algorithm was higher than that of LM in 64 % of cases; ‘segmented’ methods were poorer than our algorithm in 100 % of cases.

Conclusion

The proposed modified VARPRO algorithm can lead to better fit of the IVIM model to LARC DW-MRI data compared to other techniques.

     

Surface and morphological investigation of the electrode/electrolyte properties in an all-solid-state battery using a Li<Subscript>2</Subscript>S-P<Subscript>2</Subscript>S<Subscript>5</Subscript> solid electrolyte

All-solid-state lithium-ion batteries represent a promising battery technology thanks to the replacement of the volatile and flammable state-of-the-art liquid electrolyte by a solid electrolyte. Despite the recent progress in the synthesis of sulfide based solid electrolyte with high ionic conductivity, little is known about the interface reactivity of the solid electrolyte with electrode materials. In this study, we synthesized and characterized an amorphous solid electrolyte with the nominal composition (Li₂S)₃(P₂S₅). We assessed the feasibility of using this electrolyte at the laboratory scale, and we discuss the potential challenges that govern its electrochemical performance. Galvanostatic cycling and rate performance measurements were conducted using lithium titanium oxide (Li₄Ti₅O₁₂) as the negative electrode material. The electrochemical measurements were performed using two different counter electrodes, namely Li metal and an InLi_x alloy. The alloy counter electrode suppressed the formation of lithium dendrites, resulting in increased cycling stability and cell safety. Post mortem X-ray photoemission spectroscopy measurements reveal the reactivity of the solid electrolyte Li₃PS₄ with the Li₄Ti₅O₁₂, lithium metal, and InLi_x alloy.     

Oxidation Behavior of Aerospace Materials in High Enthalpy Flows Using an Oxyacetylene Torch Facility

The oxyacetylene torch facility is used to measure the ablation rates of graphite and the surface temperatures of different aerospace materials. The free‐stream flame environment is characterized as a function of flame chemistry for heat flux, pO₂, and flow velocity. Measured ablation rates for graphite increase as a function of increasing heat flux and pO₂, which are validated by applying an oxygen diffusion based model. The model uses experimentally measured values for temperature, pO₂, and gas velocity in order to confirm torch testing results are reliable and reproducible. Surface temperatures of ultra‐high temperature ceramic composites are measured as a function of increasing heat flux and show an enthalpic cooling effect on the flame during oxidation testing.     

Peculiar crystallization kinetics of biodegradable poly(lactic acid)/poly(propylene carbonate) blends

Binary blends of poly(lactic acid) (PLA) and poly(propylene carbonate) (PPC) were found to display a peculiar crystallization kinetics. The two biodegradable polymers were blended by melt mixing, to obtain binary blends at various compositions. Temperature‐modulated calorimetry and dynamic‐mechanical analysis indicated that the blend components are partially miscible, and display two separate glass transitions, at temperatures intermediate to those of the plain polymers. Electron microscopy analysis disclosed the morphology of PLA/PPC blends, made of PPC‐rich particles finely dispersed within the PLA‐rich matrix. The possible establishment of interactions between the functional groups of the two polymers upon melt mixing has been hypothesized as the reason for partial miscibility and compatibility of the two biodegradable polymers. The PLA/PPC blends display good mechanical properties, with enhanced performance at rupture compared with plain PLA. Most importantly, the addition of PPC affects also the crystallization kinetics of PLA, since the more mobile PPC chains favor diffusion of the stiffer PLA chain segments towards the growing crystals, which fastens the spherulite growth rate of PLA. Such positive influence of an amorphous polymer on crystal growth rate has been demonstrated here for the first time in blends that display phase‐separation in the melt. POLYM. ENG. SCI., 55:2698–2705, 2015. © 2015 Society of Plastics Engineers     

Segmentation of video background regions based on a DTCNN-clustering approach

We propose a novel algorithm for segmentation of video background models in time-variant scenarios. It is robust to gradual or abrupt illumination changes, diverse kind of noises, and even scenario variation. The algorithm generates regions according to the scene composition by keeping region segmentation coherence. The proposed method based on a discrete-time cellular neural network estimates the number regions in the current background model, and then, a modified k-means algorithm is used to achieve segmentation. The findings demonstrate the robustness of the method and its superiority over two state of the art scene segmentation algorithms.     

Analysis of the Stakeholder Engagement in the Deployment of Renewables and Smart Grid Technologies

The implementation of higher shares of renewables in a global energy mix has to be accompanied by simultaneous deployment of enabling smart grid technologies (SGTs). This combination will inevitably lead to a revolutionary change in a conventional energy system, particularly, the shifting role of consumers to prosumers. But resistance may arise from such a dramatic shift, since it is associated with high uncertainty in conjunction with increasing responsibilities of all stakeholders, the urgent need of effective control, and the development of a process. To ensure the positive influence, coherent actions of all players, and appropriate treatment of the spots of resistance, the analysis of the interplay between key stakeholders has been done. The paper introduces the framework for stakeholders' analysis, applies it on the European Union (EU) example, and provides recommendations to reduce the resistance of SGTs deployment.     

Morphology of sealant/enamel interface after surface treatment with bioactive glass

The purpose of this study was to analyze, by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM), the morphology of sealant/enamel interface after surface treatment with Biosilicate. Before pits and fissures sealing, the occlusal surfaces of 10 sound human molars were sectioned perpendicularly at the fissures in order to obtain three slices for each tooth. Slices were randomly assigned into three groups (n = 10) according to sealing protocol: Group 1‐ Acid etching + Biosilicate + glass ionomer‐based sealant (Clinpro XT Varnish, 3M ESPE); Group 2‐ Acid etching + glass ionomer‐based sealant (Clinpro XT Varnish, 3M ESPE); Group 3‐ No sealing. All slices were subjected to thermal cycling (5,000 cycles; 5–55°C; dwell time: 30s). Half of the slices from each group (n = 5) were analyzed by CLSM and the other half by SEM. Groups 1 and 2 were also submitted to EDS analysis and their data were evaluated by Two‐Way ANOVA e Tukey's test (α=5%). EDS data analysis showed higher amounts of silicon (Si) ions than calcium (Ca) ions in Group 1 (P < 0.05); Group 2 presented higher amounts (P < 0.05) of Ca ions than Si ions. It may be concluded that the use of Biosilicate for surface treatment did not affect the morphology of glass ionomer‐based sealant/enamel interfaces. Microsc. Res. Tech. 78:1062–1068, 2015. © 2015 Wiley Periodicals, Inc.